| T O P I C R E V I E W |
| speedcar |
Posted - 07/05/2010 : 10:01:30
How can I connect a SPI 95080 with GQ-4X without adapter? I have a 3M SOIC-8 how can connect with the ZIF socket? anybody knows? |
| 7 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 07/08/2010 : 11:27:33
1. check your connection.
2. Use balank check to confirm if the reading is blank. If it is blank, then the chip may be a blank chip.
|
| speedcar |
Posted - 07/08/2010 : 09:22:45
When I connect the chip in that form, the programmer only read in blank! |
| ZLM |
Posted - 07/07/2010 : 16:41:55
The chip is at the lower part of ZIF, so the VSS pin is pin20 of the programmer ZIF. That is the connection. |
| speedcar |
Posted - 07/07/2010 : 15:45:52
Thanks, I need to know how the connections are supposed to be in the ZIF connector so I can put the wires in the SOIC connector
|
| ZLM |
Posted - 07/06/2010 : 23:36:02
Image Insert:
4.52 KB |
| speedcar |
Posted - 07/06/2010 : 15:47:21
Thanks for your help, do you have the ZIF pin-out for the SPI EEPROM 95xxx and 35xxx,please?
Thanks a lot. |
| ZLM |
Posted - 07/06/2010 : 10:52:01
Use TOOL-012 TOOL-012A TestClip as a SOIC8 adapter
www.youtube.com/watch?v=nN5jhv-P4Fk |
