| T O P I C R E V I E W |
| ckean_ng |
Posted - 01/05/2011 : 07:43:57
HI ZLM
I felt i get cheated to purchase this programmer.
this programmer have a lots of problem and is not Automatic programmer at all.
and i waiting for your technical support yet i dont get the solution! |
| 6 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 01/08/2011 : 00:14:05
see http://www.mcumall.com/forum/topic.asp?TOPIC_ID=3273 |
| ZLM |
Posted - 01/08/2011 : 00:13:35
All advertising or push-sell post will be deleted. Sorry, this is forum rule. The forum only for technical discussion. |
| ckean_ng |
Posted - 01/06/2011 : 09:04:25
HI tps_star
i dont really get what u trying to tell me from the link.
so GQ-4X + TSOP48 ADP-042 is possible to program the chip MT28F800B5B ???
Can program or cannot program? |
| tps_star |
Posted - 01/06/2011 : 08:41:26
ckean_ng see this link
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=3278 |
| ckean_ng |
Posted - 01/06/2011 : 08:19:46
http://www.mcumall.com/comersus/store/TrueUSBWillem-Programmer-Comparison-4X-3X-2X-Aug-26.htm
fully automatic?
Image Insert:
128.91 KB
if let say they good at adding new devices im looking forward for the support!
i post few topic to seek for support yet i don't get any good advice from the topic i post.
i keep feed the information to mcu but i don get any solution especially i just brought the programmer last month. and this chip is is still waiting to program!
I support the device is original ship from Canada!!
but i got the feeling they just simply entertain my topic with i post!
u can refer back the topic if u see it!
The testing chip is too far to send to them. the only shipping fees will cost much more higher than if they buy it locally from electronic distributor.
this is another information i send to MCU and seek for support
Name="MT28F800B5B",ID="89889D",Class="TE28F320C3B",Category="FLASH",MFG="INTEL",Speed="5",CodeSize="1048576",Adapter="ADP-042 TSOP48 16 BIT Mode",Message="Set the adapter to 3.6V jumper position.";
this setting i can program the chip with most closest to the source file i loaded. only have around 10% error at verify.
normally what is the problem if the data shifted and verify error? |
| Bad_Ad84 |
Posted - 01/05/2011 : 11:56:19
Where does it say its an automatic programmer?
and they are good at adding new devices if possible, even better if you can send them a testing chip. |
