| T O P I C R E V I E W |
| viliukas |
Posted - 01/24/2012 : 12:06:17
Hello!I have a problem with am29f010b plcc32 chip.When i select am29f010 plcc32 programmer doesn't recognize it,it's saying that i should check pin contacts etc...adapter original adp062 from mcumall too.But when i select 27c010,id check is ok.i could read it,but couldn't erase it.Programmer: GQ-4x,software 6.13.adapter adp062.With other plcc chips i haven't that problem.Where is the problem?I'll wait for your answer.Thanks. |
| 4 L A T E S T R E P L I E S (Newest First) |
| viliukas |
Posted - 01/27/2012 : 03:45:32
I tested it.I bought 10 new chips, but the problem is ok.My freind tested adapter with his original beeprog programmer, he said that adapter-ok.I'll send programmer with adapter and chips back for mcumall support center for testing and exchange.
|
| viliukas |
Posted - 01/27/2012 : 03:44:48
quote:
Originally posted by ZLM
do a self voltage diagnostic and see if all voltage correct. The chip compatibility may be a reason.
I tested it.I bought 10 new chips, but the problem is ok.My freind tested adapter with his original beeprog programmer, he said that adapter-ok.I'll send programmer with adapter and chips back for mcumall support center for testing and exchange.
|
| ZLM |
Posted - 01/26/2012 : 09:50:58
do a self voltage diagnostic and see if all voltage correct. The chip compatibility may be a reason.
|
| viliukas |
Posted - 01/25/2012 : 03:17:31
I tried to write the newest software 6.14c but the problem is the same.I tried new and use chips,but the programmer don't recognize it.maybe it's programmer defective?i bought it from mcumall before 1 month and tried just on a few eeproms... |
