| T O P I C R E V I E W |
| KillMe3 |
Posted - 01/19/2013 : 15:30:13
Hi all,
I have recently purchased a GQ-4X.
After reading some eeproms I got the following error
Initialization failed. Please reconnect.
After reboot an a lot of trys to reconnect the programmer I reinstall the software and the usb driver.
My OS: Windows 7 x64
Ive still the same error. Initialization failed. Please reconnect.
Please help me....
Thx you all
|
| 3 L A T E S T R E P L I E S (Newest First) |
| josete2k5 |
Posted - 04/09/2015 : 09:12:05
Hi I have same problem, but it was when I changed to a new computer with W7x64.
h**p://youtu.be/qh-QSjBD8to
I've tested back in my old computer and I have same problem (it was working before).
I've contacted with the support and it will cost around 60$ to fix my unit... I'm pretty sure that is a problem with YOUR software/hardware and I'm not agree with those taxes... I do not have any guarrantee because I purchased it two years ago, but I used it no more than 10 times. |
| kbzaloka |
Posted - 10/10/2013 : 01:55:47
quote:
Originally posted by KillMe3
Hi all,
I have recently purchased a GQ-4X.
After reading some eeproms I got the following error
Initialization failed. Please reconnect.
After reboot an a lot of trys to reconnect the programmer I reinstall the software and the usb driver.
My OS: Windows 7 x64
Ive still the same error. Initialization failed. Please reconnect.
Please help me....
Thx you all
did you solve it?
i have mine with same error on vista(x86) and XP SP3
can you contact with support ? |
| ZLM |
Posted - 01/24/2013 : 12:18:55
Change to another USB cable, if problem presist, then you may need to contact support@mcumall.com for the exchange. |
