All Forums  MCUmall Forums  True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)  GQ-4X and 18F14K50

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize: 640 x 480 800 x 600 1024 x 768 1280 x 1024 UserName: Password: Format Mode: Basic  Help  Prompt  Format: Font Andale Mono Arial Arial Black Book Antiqua Century Gothic Comic Sans MS Courier New Georgia Impact Lucida Console Script MT Bold Stencil Tahoma Times New Roman Trebuchet MS Verdana   Size 1 2 3 4 5 6   Color Black Red Yellow Pink Green Orange Purple Blue Beige Brown Teal Navy Maroon LimeGreen Message: * HTML is OFF * Forum Code is ON Smilies [quote][i]Originally posted by andcvi[/i] [br]Hello Forum Members, Slight problem with programming the 18F14K50 using my GQ-4X USB Programmer Rev-1.42 (SW Rev 6.23) when I load the HEX file for this chip, in the config bits window it shows that the Voltage Regulator Enable bit is disabled, and when the programmer verifies the config bits it says it has failed, if I set this bit to enable and reprogram it passes. I have VUSB connected to VDD as the Programmer suggests, but does not make any difference if connected or not. The thing is there is no mention of a Voltage Regulator Enable bit in the Microchip 18F14K50 data sheet and there is no mention of this bit in MPLAB's 18F14K50.inc file, but in GQ's devices folder 18F14K50.dev shows the following field (key=VREGEN mask=0x20 desc="Voltage Regulator Enable bit" flags=x) setting (req=0x20 value=0x0 desc="Voltage Regulator is disabled") setting (req=0x20 value=0x20 desc="Voltage Regulator is enabled") If I delete this section in the 18F14K50.dev file and reprogram the HEX file the config bits verify still fails. Any solution to this problem. Screen Capture of Config Bit Window with HEX file Loaded [b]Image Insert:[/b][br][img]http://www.mcumall.com/forum/uploaded/zlm/20131211174915_18f14K50_config_bits_with_hex_file_loaded.JPG[/img][br][size=1] 132.7 KB[/size=1] Screen Capture of Config Bit Window with Voltage Regulator Bit set to enable for verify to pass [b]Image Insert:[/b][br][img]http://www.mcumall.com/forum/uploaded/zlm/20131211175023_18f14K50_config_bits_for_verify_to_pass.JPG[/img][br][size=1] 130.29 KB[/size=1] [b]Image Insert:[/b][br][img]http://www.mcumall.com/forum/uploaded/zlm/20131211175056_18f14K50_config_verify_fail.JPG[/img][br][size=1] 109.54 KB[/size=1][b][/b][b][/b][b][/b] [/quote]    Insert an Image File Check here to include your profile signature.