| T O P I C R E V I E W |
| Pablo Labrune |
Posted - 04/24/2015 : 07:34:26
hello I need to read this report but do not make it have a GQ-4X v6.3. I appreciate your help |
| 4 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 05/04/2015 : 19:24:20
You do not need the external power source for those chips.
Try to read those chips with USB connection only.
Make sure your adapter OR connection have no problem. |
| Pablo Labrune |
Posted - 05/02/2015 : 15:52:21
ZLM Hello, I have a question, note that when I test voltage, the controller stops responding. I tested connecting an external source and properly run the test voltage.
Could this be the problem you can not read the memory? |
| Pablo Labrune |
Posted - 05/01/2015 : 08:09:24
ZLM Hello my problem is that I want to read the memory and shows FF. The memory works because I put in the ecu and works well. I read it to modify the data to off immobilizer.
Yesterday I wanted to read a memory 95040 and also. Reading gives FF
You uninstall the program and returned to install it but without results.
I have two Gq-X4 and do the same so dismiss the programmer |
| ZLM |
Posted - 04/24/2015 : 17:54:05
What is your error message? |
