MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
ISP, ICSP, JTAG UNIVERSAL ADAPTER??
New Topic
Reply to Topic
Printer Friendly
Author
Topic
Gam3roms
4 Posts
Posted - 09/26/2008 : 12:10:36
How do i use this adapter with the GQ-3X to program 16F685??
Reply #1
ZLM
2945 Posts
Posted - 09/26/2008 : 16:38:05
1.place the chip in the ZIF socket and lock the handle.
2.connect the 5 jumper wires from programmer ICSP header to the correspondent pin beside the ZIF socket.
Reply #2
Gam3roms
4 Posts
Posted - 09/26/2008 : 17:24:45
the adapter is not labeled, so i dont know where to put wires, and dont know where to put chip in socket. need instructions or diagram.
NVM, I FIGURED IT OUT. thanks for great products!!!
Edited by - Gam3roms on 09/26/2008 17:50:16
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.11 sec.
Snitz Forums 2000