| Author |
 Topic  |
|
|
Bad_Ad84
210 Posts |
 Posted - 03/02/2009 : 04:37:42
|
i cant seem to get this to read, but the software doesnt seem to have the tsop32 device in its list, any ideas?
pretty sure i have all the required adapters |
Edited by - Bad_Ad84 on 03/02/2009 06:57:20
|
|
| Reply #1
ZLM
2945 Posts |
Posted - 03/02/2009 : 08:30:18
|
Which adapter you are using?
Can you get chip the ID correctly?
How about the chip and adapter orientation? |
 |
|
| Reply #2
Bad_Ad84
210 Posts |
Posted - 03/02/2009 : 08:46:20
|
well i have the whole tsop and lpc pack.
ive tried just using the 14mm tsop32 adapter directly and tried using it in the LPC base board, it doesnt seem to get the ID correctly.. tho it gets something its not right. |
|
|
| Reply #3
ZLM
2945 Posts |
|
| Reply #4
Bad_Ad84
210 Posts |
Posted - 03/02/2009 : 09:38:41
|
| im getting back 8506 for the device id |
|
|
| Reply #5
Bad_Ad84
210 Posts |
Posted - 03/02/2009 : 09:42:26
|
also, im having similar issues with M29F080A, which im pretty sure is down to using the wrong adapter.. could you just post a link to right one, so i can pick it out of the sets i have?
Other than that, im very pleased with my purchase, it programs all other chips i usually use alot faster than my para willem, once i get these 2 sorted ill be happy :)
thanks for your help so far |
|
|
| Reply #6
ZLM
2945 Posts |
Posted - 03/02/2009 : 22:38:09
|
| The ID you got from SST39VF020 is not a correct ID. The SST39VF020 is a tested and confirmed chip on GQ-4X. So, you need to check the chip again see if all pins are contacting good. If possible, use the multi-meter to check the contacting. |
|
|
| Reply #7
Bad_Ad84
210 Posts |
Posted - 03/03/2009 : 05:24:16
|
yeah, after speaking to the person it was from (its a xbox dvd drive chip) its certainly possible the chip is damaged.
any ideas about the tsop40b adapter? and the chip i mentioned above? as i know that chip is a working one.. |
|
|
| Reply #8
Bad_Ad84
210 Posts |
Posted - 03/04/2009 : 15:08:24
|
| Solved, i just got an email stating i wasnt actually shipped the tsop40b adapter, hence why i was having issues. |
|
|
| Reply #9
fox_el_negro
Mexico
19 Posts |
Posted - 04/18/2009 : 23:02:40
|
on the xbox 360 chip just make a raw dump then use the decripter program to take out the key..
othe hitachi drives wen the flash programing starts showing erros dont worrie, if you try to reflash the drive will brick...
just make a diferencial flash the drive will return a non diferencials so the drive is correct!!!!
sorry for my bad english... |
c64 |
|
|
| Reply #10
Bad_Ad84
210 Posts |
Posted - 04/19/2009 : 15:47:38
|
| it wouldnt read/write the chip correctly. |
|
|
| Reply #11
fox_el_negro
Mexico
19 Posts |
|
| Reply #12
ZLM
2945 Posts |
Posted - 04/20/2009 : 12:57:31
|
| SST39VF020 should work with standard TSOP32 adapter. No need to solder wires on adaper. |
|
|
| |
Topic |
|
SST39VF020 - tsop32 package
