MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Is there anybody who can explain this picture?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

sprit01

Korea
15 Posts
Posted - 03/03/2009 :  08:49:51  Show Profile  Reply with Quote


Image Insert:

50.12 KB

I figured out Options and Oscillator Select but don't have any idea of "Number Settings"

Can anybody knows what the number settings means?
Thank you
Reply #1

ZLM

2945 Posts
Posted - 03/03/2009 :  11:34:58  Show Profile  Reply with Quote
You need to read the datasheet of your chip.
What is your chip part number?
Go to Top of Page
Reply #2

sprit01

Korea
15 Posts
Posted - 03/03/2009 :  11:59:34  Show Profile  Reply with Quote
12f675
I read the datasheet of 12f675..
According to this, Only the Least Significant 7 bits of the ID locations are used
So, I set "00 00 00 FF 00 FF 00 FF" on "00002000"
However, it's not working
am I wrong?
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 03/03/2009 :  23:52:14  Show Profile  Reply with Quote
What is your means "it is not working"? Th ID is no part of yor code, you need to set it manually.
Go to Top of Page
Reply #4

sprit01

Korea
15 Posts
Posted - 03/05/2009 :  05:02:27  Show Profile  Reply with Quote
That wasn't problem it was from different portion..
When I change the portion of 3fe, the writer says "it's done". however, when I read it back from the chip, it wasn't burned
the data I want to put is "347c"
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000