MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-2X and 64bits OS (at least Vista or Seven)		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

LMQT

France
23 Posts
Posted - 08/22/2009 :  07:57:56  Show Profile  Reply with Quote
As the only version (v3.03) found on http://www.mcumall.com/downloads/ for GQ-2X can't works under Vista or Seven 64bits, here is a guide to make it works :

1] DL driver v2.0 or v2.01 (both are working well) (link above)
2] connect board
3] installed it with v2.0x driver previously downloaded

4] DL a v4 programm, beta version from b0 to b5B =>
- http://www.mcumall.com/download/TrueUSBWillem/GQUSBPrgRe4.0Beta.exe
- http://www.mcumall.com/download/TrueUSBWillem/GQUSBPrgRe4.0Beta4.exe
- http://www.mcumall.com/download/TrueUSBWillem/GQUSBPrgRe4.0Beta5B.exe
5] install it

=> all is done :)

Tested on Vista Ultimate x64 and Seven Ultimate x64 (real final RTM, not a RC or a fake RTM)
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000