MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Checksum error reading HexFile		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Necrosaro420

109 Posts
Posted - 01/20/2010 :  17:24:29  Show Profile  Reply with Quote
Is there a way to turn this message off??? I know the files I use are good, I have used them several times before. But now on 2 different pc's I try to load files up and it gives me "Checksum error reading HexFile" and it wont load the files to let me burn them. These are 4 meg files using M29F032d Using v5 software. Thanks
Reply #1

Necrosaro420

109 Posts
Posted - 01/20/2010 :  17:26:29  Show Profile  Reply with Quote
BTW, one pc is using Win 7 Pro, other is XP Pro
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 01/21/2010 :  21:36:08  Show Profile  Reply with Quote
Then the hex file may be not a good one. Or you can send it to me check it.

Another way is to convert your hex file to bin file use the convertor. Then load the bin file.
Go to Top of Page
Reply #3

Necrosaro420

109 Posts
Posted - 01/22/2010 :  04:29:50  Show Profile  Reply with Quote
Heya, if I go to file>open and browse to the file this happens. But then directly after that, if I go to File and then scroll to the bottom of recent opened ones and pick the exact same file, it does not do this, and it burns fine. Sounds liek a bug in the prog IMO
Go to Top of Page
Reply #4

ZLM

2945 Posts
Posted - 01/22/2010 :  10:21:29  Show Profile  Reply with Quote
Looks like a bug. We will check the software.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000