MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4x and SST25VF080B problem		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

finla

2 Posts
Posted - 02/18/2010 :  06:40:43  Show Profile  Reply with Quote
Hello,

GQ-4x can read the chip but didnīt erase the chip. I tried so many time but nothing empty. Blank Checking Gq-4x said " Device blank check failed at address 0x000000, Read= 0x91."

I tried to write new bios-file. GQ-4x worked fine with red-led, after writing without problems but verifing failed, I read the chip again and nothing changed in the chip.

Please helps !
Reply #1

ZLM

2945 Posts
Posted - 02/18/2010 :  07:50:51  Show Profile  Reply with Quote
First of all, you should be able to get corrct ID.

The chip need to be erased before write new data.

Do a blank check before write new data to make sure the chip is blank.
Go to Top of Page
Reply #2

finla

2 Posts
Posted - 02/18/2010 :  11:44:53  Show Profile  Reply with Quote
Thank you !
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000