MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 AT89C52 40 pin DIP ?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

RoadRanger

USA
2 Posts
Posted - 01/18/2011 :  14:50:33  Show Profile  Reply with Quote
Does this part need the ADP-015 adapter on the GQ-4X or do you only need that for the PLCC version of the chip? Thanks!
Edited by - RoadRanger on 01/19/2011 07:03:15
Reply #1

ZLM

2945 Posts
Posted - 01/19/2011 :  18:36:36  Show Profile  Reply with Quote
Yes. This chip needs ADP-015 for both DIP40 and PLCC44 chips.
Go to Top of Page
Reply #2

RoadRanger

USA
2 Posts
Posted - 01/26/2011 :  16:05:41  Show Profile  Reply with Quote
Thanks for the reply!

Is the adapter needed because the main unit lacks some circuitry to support this device or is it because the software has not yet been updated to support some 40 pin devices directly on the main unit? We were able to borrow another programmer to do the ones we needed and it will probably be a year before we get another need to program this particular device - so will hold off on purchasing the adapter if the device will someday be supported directly on the main unit :) .
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 01/28/2011 :  01:05:37  Show Profile  Reply with Quote
The adapter is needed due to the programmer hardware design. The GQ-4X is still be the Willem programmer family. So, the software will not fix the problem. You need the ADP-015 for sure.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000