MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-3X new firmware		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

joker222

4 Posts
Posted - 01/27/2011 :  05:01:36  Show Profile  Reply with Quote
i have used my GQ-3X programmer 6 months ago toflas a sst39vf3201chip , then after i formated my computer reloaded the new software 6.00 programmer keep on asking to upgrade to new firmware checked the driver version it is 2.0.1.0 when i lunch the prog on the screen says
h/w GQ-3X Re-1.00
USB Driver 2.0
software Re 6.00
checking new software on server...
DEVICE SST39VF3201
this software is updatedcalready
and another window that says
this device is not supported on this programmer version you may need to upgrade the programmer or firmware
what could be my problem? thx
Reply #1

ZLM

2945 Posts
Posted - 01/28/2011 :  01:18:10  Show Profile  Reply with Quote
The Re.1.00 is a very old firmware. You need to upgrade in order to work with new software. Please write to support@mcumall.com for upgrade assistant.
Go to Top of Page
Reply #2

joker222

4 Posts
Posted - 01/28/2011 :  05:34:20  Show Profile  Reply with Quote
did that have to send the unit for them to upgrade
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 01/28/2011 :  10:17:50  Show Profile  Reply with Quote
Yes.
Go to Top of Page
Reply #4

gerri

2 Posts
Posted - 03/25/2011 :  22:18:51  Show Profile  Reply with Quote
Hello
Unfortunately, I have the same problem with rev. 1.0 How can I update the firmware?

Greetings from Austria
Go to Top of Page
Reply #5

ZLM

2945 Posts
Posted - 03/26/2011 :  06:46:14  Show Profile  Reply with Quote
You have to send the unit for them to upgrade. Ask support@mcumall.com for RMA. OR you can use old software.
Go to Top of Page
Reply #6

gerri

2 Posts
Posted - 03/30/2011 :  10:00:37  Show Profile  Reply with Quote
Ok thanks
I have a little problem with breaking the AT89C2051 programming at 9 - over 14%.
I've bought an extra adapter for this chip through from Zeitech.

Can this problem on the old firmware are?

Greeting Gerri
Go to Top of Page
Reply #7

ZLM

2945 Posts
Posted - 03/31/2011 :  20:53:14  Show Profile  Reply with Quote
This should no be the firmware issue.

Use slower speed and try. Some old AT89C2051 has some compatibility problem.
Go to Top of Page
Reply #8

ZLM

2945 Posts
Posted - 03/31/2011 :  20:53:15  Show Profile  Reply with Quote
This should no be the firmware issue.

Use slower speed and try. Some old AT89C2051 has some compatibility problem.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000