MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 How to program m27c160 with GQ-3x		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Arm123

3 Posts
Posted - 04/05/2011 :  14:07:14  Show Profile  Reply with Quote
Im haveing trouble programming a m27c160 with the GQ-3x and 4.0 software...

shorted J1 pins 1 and 2
shorted J2 pins 1 and 2
shorted J2 pins 3 and 4

It passes the blank check... but it comes up with an error right away, when i write.

any ideas ?
Reply #1

Arm123

3 Posts
Posted - 04/05/2011 :  14:09:03  Show Profile  Reply with Quote
Forgot to mention that i have the ADP-055 adapter
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 04/07/2011 :  16:38:06  Show Profile  Reply with Quote
What is the error? always same address?
check pin contact, adapter contact.

See video:
Using ADP-054 on GQ-4X programmer for M27C2048 and M27C160 ( 27C2048 27C160 )
www.youtube.com/watch?v=Y9-aRPKyL-s
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000