MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 TI TMS2532JL (not 2532AJL)		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

olpo

1 Posts
Posted - 07/26/2011 :  22:15:42  Show Profile  Reply with Quote
I tried to burn a TI TMS2532JL eprom today and as soon as I choose that chip I get "apply external power".

No problem with doing that only if I could find some specs on what voltage, current and pin config of the external powersource.

Did some search on the forum and well I can find some results saying from 9V up to 25V... current 300mA up to 1.11A

Done the voltage check in the software which tells me that 25V is ok but when I try this chip I get "apply external power".

So question is, where can I get proper info about the external powersource specs?
Reply #1

Bad_Ad84

210 Posts
Posted - 07/27/2011 :  04:57:29  Show Profile  Reply with Quote
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4270

This is what mcumall itself sells, so I would imagine thats a good place to start.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000