MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 SST49LF040B		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

brunoxghx

1 Posts
Posted - 10/05/2011 :  15:27:06  Show Profile  Reply with Quote
I don't really have a problem...

I had problem with flashing SST49LF040B.

The chip wasn't correctly detected I didn't know why. The voltage listed in the software wasn't correct. I changed it from 12V to 3.6V.

3.6V is the correct voltage. After I changed the voltage in devices.txt, everything was perfect.

I suppose someone will change the default value of devices.txt .

Thanks
Bruno
Reply #1

ZLM

2945 Posts
Posted - 10/06/2011 :  09:48:01  Show Profile  Reply with Quote
Thank you for your information. I will change it later.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000