MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X fails with TS57C256D
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

evening1@gmail.com

2 Posts

Posted - 12/07/2011 :  14:01:54  Show Profile  Reply with Quote
Help - this is frustrating!

Problem: Write Failed, Address-0x000000, Buffer 0x00, Device 0xFF

Hardware Profile

Macbook w/ WinXP SP2
GQ-4x v.1.30
USBProg 6.13, Driver 2.01
GQ-4x passes VCC & VPP tests

Device reads and passes blank check, but fails on write with the above error.
The device ID's as a toshiba but no detail beyond that.

I've upgraded to the latest s/w versions and tried;
restarting both XP and USBProg,an external power supply,
using the generic 27C256 profile and adjusting the write speed.

All to no avail.

I'm not sure if this matters but the GQ reports that the device passes blank check, verifies and fails on write WITHOUT an eprom installed, but with the correct device profile loaded.



Edited by - evening1@gmail.com on 12/07/2011 14:50:44
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000