MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Any way to read BR9010 EEPROM with GQ-X3?		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

kalosbg

5 Posts
Posted - 12/25/2012 :  11:33:48  Show Profile  Reply with Quote
Hello,
first Merry Christmas
i need to read BR9010 with my GQ-3X.
h**p://www.datasheetcatalog.org/datasheets/208/122927_DS.pdf

EEPROM is with rotated pins. 2 is VCC 7 is GND.

Try to read as 93C46 16bit but no result.

Please help me!

Thanks
Edited by - kalosbg on 12/25/2012 11:35:14
Reply #1

ZLM

2945 Posts
Posted - 12/27/2012 :  18:38:08  Show Profile  Reply with Quote
You need ADP-088.
Go to Top of Page
Reply #2

kalosbg

5 Posts
Posted - 03/03/2014 :  12:01:05  Show Profile  Reply with Quote
now i have the same problem.
I solder small cables to the pins of br9010 but which device i must select.
I have GQ-3X programmer.
Thanks!
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 03/03/2014 :  15:20:23  Show Profile  Reply with Quote
br9010 has special pinout, check the daashet for the pinout.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000