MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
28F016SCT
New Topic
Reply to Topic
Printer Friendly
Author
Topic
Necrosaro420
109 Posts
Posted - 05/11/2013 : 16:00:32
What is the line to use for 28F016's? Thanks
Edited by - Necrosaro420 on 05/11/2013 16:01:17
Reply #1
Necrosaro420
109 Posts
Posted - 05/11/2013 : 16:01:58
These start with L and H. If I put them together in front of the model number, it gives some wierd html code on here.
Reply #2
Necrosaro420
109 Posts
Posted - 05/16/2013 : 16:25:15
Yeah.
Reply #3
ZLM
2945 Posts
Posted - 05/16/2013 : 22:11:28
looks like this chip is a PSOP56 from datasheet. GQ-4X is unable support it.
Reply #4
Necrosaro420
109 Posts
Posted - 05/17/2013 : 00:30:42
Can I ask why? The pinouts are the same as the 29f016's
Reply #5
ZLM
2945 Posts
Posted - 05/28/2013 : 23:20:35
What package is it? If it is PSOP56, then GQ-4X does not support it.
Reply #6
Necrosaro420
109 Posts
Posted - 07/13/2015 : 20:05:02
It's TSOP40
Reply #7
ZLM
2945 Posts
Posted - 07/14/2015 : 16:37:37
This is a same question as following:
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=5117
I think we need new adapter for this chip: TSOP40C on ADP-082.
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.08 sec.
Snitz Forums 2000
28F016SCT
Posted - 05/11/2013 : 16:00:32
