MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 ADP-056 JTAG		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

M1DJF

United Kingdom
29 Posts
Posted - 10/17/2013 :  02:35:58  Show Profile  Reply with Quote
Hi
Could some one help me how can I use ADP-056 JTAG adapter with what settings on GX4 programmer would appreciate all help trying to read tms 470 and other etc.
Thank you.
If you can't do it don't screw it leave it as you find it.
Reply #1

ZLM

2945 Posts
Posted - 10/17/2013 :  09:55:31  Show Profile  Reply with Quote
The tms 470 is not supported on this programmer. The GA-4X JTAG used to support CPLD devices programming.
Go to Top of Page
Reply #2

M1DJF

United Kingdom
29 Posts
Posted - 10/24/2013 :  13:15:59  Show Profile  Reply with Quote
CPLD devices could you please tell me what settings do I use on the software as I will be using as jtag please excuse my ignorance.
If you can't do it don't screw it leave it as you find it.
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 10/24/2013 :  14:17:49  Show Profile  Reply with Quote
No special settings from software. The adapter only has one VCC to target on/off jumper.

see video ADP-056 JTAG with GQ-4X for Altera EPM3128A CPLD:
www.youtube.com/watch?v=RBLEZNL3L2Q
Go to Top of Page
Reply #4

M1DJF

United Kingdom
29 Posts
Posted - 10/25/2013 :  03:24:29  Show Profile  Reply with Quote
Thank you ZLM for your help will try and report back your help was much appreciated .
If you can't do it don't screw it leave it as you find it.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000