MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 MX 25L1005A PROBLEM!! PLS help		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

brogdan

Romania
2 Posts
Posted - 01/23/2014 :  12:21:10  Show Profile  Reply with Quote
hello
i am having trouble flshing the MX 25L1005A
i managed to read the memory, also erase it, but when i tried to write to it, it shows that is writing, but when it goes to verify, i get an error.

i found out that when i go to Lock button, and hit "read" i get this:

(00000H-0FFFF): Block 0 is not protected.(0x1c)
(080000H-0FFFF): Block 1 is not protected.(0x1c)
(0C0000H-0FFFF): Block 2 is protected.(0x1c)
(0E0000H-0FFFF): Block 3 is not protected.(0x1c)
(0F0000H-0FFFF): Block 4 is not protected.(0x1c)
* END *

i tried the "unprotect" button, it sais DONE, but still can't write the memory!

is there something i am doing wrong?

PLEASE HELP!!
www.laptopfix.ro
Edited by - brogdan on 01/23/2014 12:21:55
Reply #1

ZLM

2945 Posts
Posted - 01/24/2014 :  11:52:29  Show Profile  Reply with Quote
Does verify fails on same address every time?

Try to use lower speed and see if it works.
Go to Top of Page
Reply #2

osvaldo

Argentina
148 Posts
Posted - 02/09/2014 :  13:08:21  Show Profile  Reply with Quote
fijate memory this good contacts clean ic adapter and if that does not throw that error. if you can look at the data sheet saver memory to the memory id
osvaldo tecnico
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000