| Author |
 Topic  |
|
|
nochkin
11 Posts |
 Posted - 03/27/2007 : 05:18:52
|
I have bunch of adapters for older Willem programmer which I had in the past. I bought them from sivava some time ago.
Do you know if all of them should work?
I'm wondering about FWH/LPC adapter, for example. It does not really work right now. It's been designed for old Willem programmer, but I need it to work with new GQ-2X now.
Is there any modification has to be done to it to make it work?
|
|
| Reply #1
ZLM
2945 Posts |
Posted - 03/27/2007 : 14:56:04
|
Except the FWH/LPC adapter, all other willem programmer's adapters should work.
There is a simple modification needed on parallel willem's FWH/LPC adapter.
See:
16.52 KB |
 |
|
| Reply #2
nochkin
11 Posts |
|
| Reply #3
ZLM
2945 Posts |
Posted - 03/28/2007 : 18:17:09
|
Those 2 transistors are for driving high current devices.
What's your chip number you programmed on this adapter? |
|
|
| Reply #4
nochkin
11 Posts |
Posted - 03/29/2007 : 12:24:40
|
These are 49LF080A by SST and W39V080FA by Winbond.
|
|
|
| Reply #5
ZLM
2945 Posts |
Posted - 03/30/2007 : 07:50:00
|
| How did you do on W39V080FA since it is not in the current spported list yet? |
|
|
| Reply #6
nochkin
11 Posts |
Posted - 03/30/2007 : 09:26:30
|
This list has W39V040 so I added W39V080 based on this.
I did not do much testing and did not see its specs, I just assumed that the difference is the capacity only.
Name="W39V080",ID="DAD3",Class="49LF002",Category="FLASH",MFG="WINBOND",Adapter="FWH/LPC+",CodeSize="1048576";
|
|
|
| Reply #7
ZLM
2945 Posts |
Posted - 03/31/2007 : 01:57:34
|
This is a correct way to add a new device.
Here the ID="DAD3" is for W39V080FA.So the device name should be: Name="W39V080FA" |
|
|
| Reply #8
ZLM
2945 Posts |
|
| Reply #9
effesse
Italy
8 Posts |
Posted - 12/09/2011 : 05:57:07
|
Dear MCUMALL / ZLM good morning, I need to modify my 2 FWH/LPC adapters used on Willem v3b in order to use them again on the new GQ-4X. Can you help me to understand if I have to apply the CUT & WIRE mod on the top layer or in the bottom layer? Thank you in advance, best regards, Stefano.
Image Insert:
7.14 KB
Image Insert:
42.38 KB |
Effesse72 |
|
|
| Reply #10
effesse
Italy
8 Posts |
|
| |
Topic |
|
Compatibility with old adapters from Willem
