MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Adapter 56 JTAG SPI		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

BDMaster

Italy
4 Posts
Posted - 07/07/2014 :  06:12:00  Show Profile  Reply with Quote
How to use it ?
I have connected to SPI line MoBo but Programmer don't listen It !
Someone can explain how to configure and use with software ?
Thanks
Reply #1

ZLM

2945 Posts
Posted - 07/15/2014 :  14:53:40  Show Profile  Reply with Quote
The software does not have much setting. The only thing is the speed.

On the adapter, the you need to set the VCC mode, to select the VCC source either from programmer OR from the target board.

Connect the wires as shoot as possible.

See:
www.youtube.com/watch?v=RBLEZNL3L2Q


For the SPI, the ADP-056 is optional. You can try to direct connect your chip to the programmer ZIF socket. Unless it does not work good.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000