MCUmall EPROM BIOS Chip Burner Forum - GG-4X ZIF-Socket Pinning

MCUmall EPROM BIOS Chip Burner Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

MCUmall Forums

True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)

GG-4X ZIF-Socket Pinning

New Topic

Reply to Topic

Printer Friendly

Author

Topic

Rolle

Germany
4 Posts

Posted - 03/10/2015 : 08:08:52

Hi,

i have buy a GQ-4X and want to programm SPI-Flash "EN25Q64". The software supporting this chip, but i cant connect this tiny thing to programmer. The chip is soldered on pcb as BGA! (Ball Grid Array).
I want to connect it with short wires direct to the zif socket but i can not find the pinning of the zif socket. The connection on pcb is no problem, i connect to the spi testpoints. :-)

is a pinning of the zif socket available?

Greetings
Rolle (from Germany:D)

Reply #1

ZLM

2945 Posts

Posted - 03/13/2015 : 13:39:18

You just need an adapter . A BGA - DIP8 adapter.

Not sure how many balls on your chip. Check it and find the adapter from the market.

Reply #2

Rolle

Germany
4 Posts

Posted - 03/14/2015 : 15:13:53

Hi ZLM,
the Adapter is useless for me. I can not unsolder the chip from the printed circuit board because i dont have the special soldering equipment. But i can connect the programmer to the spi testpoints on the pcb with short wires to program the chip "in circuit". I dont have the Pinout of the zif socket so i dont care the correct connections. can you supply this infomation please???

Rolle :-)))

Reply #3

ZLM

2945 Posts

Posted - 03/14/2015 : 16:46:11

see:

Image Insert: