| T O P I C R E V I E W |
| yoseph |
Posted - 03/13/2019 : 05:32:19
This model IC 24g16 not included in the device list is there any other means to add this device
If any one knows please |
| 11 L A T E S T R E P L I E S (Newest First) |
| anniel |
Posted - 04/04/2019 : 02:55:41
quote:
Originally posted by laptech
quote:
Originally posted by anniel
quote:
Originally posted by laptech
The GQ-4x4 is a SPI programmer (Serial Peripheral Interface), the chip you are trying to program uses the i2c bus interface. I do not think the programmer supports both programming interfaces.
All 24 series EEPROM use I2C and thus supported by the GQ-4X.
Are you 100% sure because I2C and SPI are two different communication methods and no where can i find if the GQ-4X supports I2C.
Just look at any 24 series datasheet… Never found one that didn't work on the GQ-4X.
Keep in mind it can be called I²C, I2C, IIC, TWI, TWSI, Two-Wire Interface, Two-Wire Serial Interface or simply 2 wire. |
| laptech |
Posted - 04/04/2019 : 01:56:39
quote:
Originally posted by anniel
quote:
Originally posted by laptech
The GQ-4x4 is a SPI programmer (Serial Peripheral Interface), the chip you are trying to program uses the i2c bus interface. I do not think the programmer supports both programming interfaces.
All 24 series EEPROM use I2C and thus supported by the GQ-4X.
Are you 100% sure because I2C and SPI are two different communication methods and no where can i find if the GQ-4X supports I2C. |
| anniel |
Posted - 04/03/2019 : 04:52:42
quote:
Originally posted by laptech
The GQ-4x4 is a SPI programmer (Serial Peripheral Interface), the chip you are trying to program uses the i2c bus interface. I do not think the programmer supports both programming interfaces.
All 24 series EEPROM use I2C and thus supported by the GQ-4X. |
| laptech |
Posted - 04/01/2019 : 05:33:14
The GQ-4x4 is a SPI programmer (Serial Peripheral Interface), the chip you are trying to program uses the i2c bus interface. I do not think the programmer supports both programming interfaces. |
| anniel |
Posted - 03/30/2019 : 11:21:59
quote:
Originally posted by yoseph
I tried but when it check ID it displays the function not supported by this device
I don't think those chips support ID. |
| yoseph |
Posted - 03/30/2019 : 05:29:24
I tried but when it check ID it displays the function not supported by this device |
| anniel |
Posted - 03/14/2019 : 03:02:34
quote:
Originally posted by yoseph
Im sure that the model IC is ROHM BR24G16 if any one knows please
Try this. Name="BR24G16",ID="XXXX",Class="24C16",Category="SERIAL_EPROM",MFG="ROHM",VCC="3.6V"; |
| yoseph |
Posted - 03/13/2019 : 23:29:34
Im sure that the model IC is ROHM BR24G16 if any one knows please |
| anniel |
Posted - 03/13/2019 : 06:10:34
quote:
Originally posted by yoseph
My device is GQ 4X4
Good choice. |
| anniel |
Posted - 03/13/2019 : 06:10:06
quote:
Originally posted by yoseph
This model IC 24g16 not included in the device list is there any other means to add this device
If any one knows please
Are you sure it is a "g" and not a "c" on the chip or is it a ROHM BR24G16? |
| yoseph |
Posted - 03/13/2019 : 05:34:55
My device is GQ 4X4 |
