MCUmall EPROM BIOS Chip Burner Forum

Active Users: / Visits Today:
Highest Active Users:

MCUmall EPROM BIOS Chip Burner Forum

All Forums

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Insert an Image File
Check here to include your profile signature.

T O P I C R E V I E W
scottrod	Posted - 11/28/2015 : 15:14:41 Trying to program some MBM27C1000 chips for the Korg Wavestation. The Fujitsu MBM27C1000 chip differs from the generic 27C1000 chip (and Fujitsu MBM27C1001 chip) in that the OE and A16 pins are swapped (Pins 2 and 24). Can someone point me to instructions on how to code in the appropriate info in the devices.txt file to define the proper pins for the non-standard MBM27C1000?
2 L A T E S T R E P L I E S (Newest First)
anniel	Posted - 12/15/2015 : 13:52:49 Try 27C010
chadbh74	Posted - 12/13/2015 : 18:14:30 Probably easier said than done in the software and/or devices.txt. Might be easier to make take a DIP32 socket, solder on pin headers and cross-jumper those 2 pins effectively swapping them.. which would be essentially making an adapter that would drop that chip into the GQ-4X ZIF.

MCUmall EPROM BIOS Chip Burner Forum

Generated in 0.05 sec.