| T O P I C R E V I E W |
| martininkent |
Posted - 01/22/2017 : 09:58:58
hello this is the problem iam now getting was fine , but now it will not read or right,,, iam thinking its the programmer, I have bought new 004 and 088 adapters again,
Image Insert:
1080078 bytes |
| 3 L A T E S T R E P L I E S (Newest First) |
| anniel |
Posted - 04/26/2018 : 14:57:59
quote:
Originally posted by vibroverbus
I've been told to use either a different programmer, like an R270, or one of those "M35080 dedicated" programmers to erase them again, which seems like a terrible waste of $$$ since you'd think a generic programmer should be able to do it given the right instructions.
True! |
| vibroverbus |
Posted - 04/26/2018 : 04:22:09
Be sure you are using the right pin-out / adapter.
Even so I find I also cannot write some brand new V6 chips I have.
I suspect either the programmer is not using enough voltage, or, there is a chip issue (i.e. counterfeits / out of spec / mis-formatted from factory). I've been told to use either a different programmer, like an R270, or one of those "M35080 dedicated" programmers to erase them again, which seems like a terrible waste of $$$ since you'd think a generic programmer should be able to do it given the right instructions. Maybe the MCUMall programmer isn't providing high enough voltage...? |
| martininkent |
Posted - 01/22/2017 : 11:29:50
by the way this is a new chip , iam trying to write too |
|
|
