| T O P I C R E V I E W |
| joni12341 |
Posted - 05/28/2018 : 00:27:40
hi
EN29LV800BT-70
add in device list Name="EN29LV800BT",ID="1CDA",Class="29LV800T",Category="FLASH",MFG="Eon Silicon",Adapter="ADP-003 TSOP48 8 BIT Mode",VCC="3.6V",Message="Set the adapter to 5V jumper position,29FXXX.";
in soft celect EN29LV800BT
tap the ID - and NO ID - DEVECE ID INFORMATION 4706
IC IS NOT LOCKED
adapter TSOP 48 8bit mode
pins selected j4=off j2=29F j1=5v
the ic is working (the laptop with him working - problem wit bios password)
please help |
| 3 L A T E S T R E P L I E S (Newest First) |
| anniel |
Posted - 06/20/2018 : 03:34:40
quote:
Originally posted by davebb
Hi I had a problem with writing, but could read ok, no id,
I found the problem was with the soldering on the ZIF socket inside the programmer, use a multimeter
test all pins from the zif to the sockets that plug on to the pcb programmer pins,
Dave
No need to open up the programmer to test it, you can simply use the software... |
| davebb |
Posted - 06/18/2018 : 08:17:29
Hi I had a problem with writing, but could read ok, no id,
I found the problem was with the soldering on the ZIF socket inside the programmer, use a multimeter
test all pins from the zif to the sockets that plug on to the pcb programmer pins,
Dave |
| laptech |
Posted - 06/13/2018 : 06:12:32
Maybe the chips is not connecting to the adapter pins properly. I have just tried a near identical chip in my GQ and you can see by the screen shots it works OK.
NOTE: My chip is slightly different to yours, mine is 29LV800CT hence why chip ID is different.
Image Insert:
596902 bytes
Image Insert:
473298 bytes |
|
|
