| T O P I C R E V I E W |
| 75alessandro |
Posted - 09/24/2018 : 04:25:42
good morning, sorry my bad english, I have some problems with the programming of some chips (27c1000 / 27c160 / 27c322). I often get the error as in the attached photo. I state that:
- before writing the chips, I always delete them
- use of win 10 (also tested with win 7 but without any improvement)
- latest software version 7.21
- I also tried with a new programmer but with no results
do you have any idea ???
Image Insert:
161613 bytes
Image Insert:
186386 bytes |
| 16 L A T E S T R E P L I E S (Newest First) |
| 75alessandro |
Posted - 10/07/2018 : 23:43:29
but the problem is before the adapter; to write the 27c1000 I do not need the adapter. sometimes he writes to me, sometimes not. I tried to buy 27c1000 / 27c160 / 27c322 from another supplier; excluding the programmer (tested with a new gq-4x, but the problem remains), usb cable, may be: bad chips or some error due to the operating system / software (win 10 + usbprog 7.21 + driver 3.0) or some incorrect setting of the program when writing. |
| ZLM |
Posted - 10/07/2018 : 16:53:58
If possible buy the latest version adapter ADP-054 V4.1. That works more stable.
|
| anniel |
Posted - 10/07/2018 : 14:32:48
quote:
Originally posted by 75alessandro
I do not think it is an adapter problem, with the 27c1000 without adapter gives me the same type of error that gives me with the 27c160 / 27c322 with adapter
Image Insert:
204380 bytes
Image Insert:
174941 bytes
Soldering doesn't look so good. |
| ZLM |
Posted - 10/07/2018 : 07:17:41
Sorry. The M27C1000 does not need adapter.
Your adapter looks is not in a good condition.
Have you ever programmed 27C1000 on this programmer successfully?
The software has no problem since it has been tested on this chip.
The M27C1000 is compatible with 27C301.
Make sure your chips are good if you bought the chip from eBay.
|
| 75alessandro |
Posted - 10/07/2018 : 05:29:07
I do not think it is an adapter problem, with the 27c1000 without adapter gives me the same type of error that gives me with the 27c160 / 27c322 with adapter
Image Insert:
204380 bytes
Image Insert:
174941 bytes |
| ZLM |
Posted - 10/06/2018 : 11:51:51
Can you take a picture of adapter? Backside too? |
| anniel |
Posted - 09/28/2018 : 17:30:38
quote:
Originally posted by 75alessandro
new chip!
Your 27C1000 is probably a bad or fake chip if you can't ID it. |
| 75alessandro |
Posted - 09/28/2018 : 14:46:22
new chip! |
| anniel |
Posted - 09/28/2018 : 08:09:53
quote:
Originally posted by 75alessandro
tried, unfortunately, nothing changes. I have exhausted all my ideas
Is this with a "new" chip or a chip pulled out of a working system? |
| 75alessandro |
Posted - 09/28/2018 : 04:41:15
tried, unfortunately, nothing changes. I have exhausted all my ideas |
| anniel |
Posted - 09/27/2018 : 14:12:15
quote:
Originally posted by 75alessandro
with 27c1000 not working ..... I have exhausted my ideas ....
Image Insert:
156462 bytes
Select 27C1000 not M27C1000 and try again. |
| 75alessandro |
Posted - 09/25/2018 : 07:53:58
with 27c1000 not working ..... I have exhausted my ideas ....
Image Insert:
156462 bytes |
| anniel |
Posted - 09/25/2018 : 05:37:14
quote:
Originally posted by 75alessandro
ID device (for 27c1000/27c322/27c160) function not supported!
ID should work for the 27C1000. |
| 75alessandro |
Posted - 09/25/2018 : 05:06:18
ID device (for 27c1000/27c322/27c160) function not supported!
|
| 75alessandro |
Posted - 09/24/2018 : 20:47:45
The chip ID does not detect me. I do not know if it is normal or not, the example above is with the 27c1000 but it does me the same with the 27c160 and 27c322 (mounted with adapter). |
| anniel |
Posted - 09/24/2018 : 15:05:03
quote:
Originally posted by 75alessandro
good morning, sorry my bad english, I have some problems with the programming of some chips (27c1000 / 27c160 / 27c322). I often get the error as in the attached photo. I state that:
- before writing the chips, I always delete them
- use of win 10 (also tested with win 7 but without any improvement)
- latest software version 7.21
- I also tried with a new programmer but with no results
do you have any idea ???
Image Insert:
161613 bytes
Image Insert:
186386 bytes
Does the chip ID correctly? |
