MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Verify Failed, Address=0x008000, Device=0x07, Buff		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

heff0018

Australia
3 Posts
Posted - 02/10/2016 :  02:58:44  Show Profile  Reply with Quote
Verify Failed, Address=0x008000, Device=0x07, Buffer=0x00
Hi all, I got through the write process but get this error on verification. The burner is a GQ-4X and the chip is Dallas DS1245Y
Any help is appreciated, Thanks
Reply #1

anniel

2572 Posts
Posted - 02/10/2016 :  07:08:26  Show Profile  Reply with Quote
Did you erase the chip?
Go to Top of Page
Reply #2

heff0018

Australia
3 Posts
Posted - 02/10/2016 :  11:59:10  Show Profile  Reply with Quote
Thanks for the reply. No as it is a NVRAM and I was advised you don't or can't erase these
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 02/10/2016 :  12:08:30  Show Profile  Reply with Quote
If the address 000000 data is 0x07, then tt looks like you have pin contacting problem on A15 pin.

Check your pin contacting.
Go to Top of Page
Reply #4

heff0018

Australia
3 Posts
Posted - 02/11/2016 :  02:34:34  Show Profile  Reply with Quote
Yes thank you, after about 20 attempts I finally got it to verify.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.12 sec. Snitz Forums 2000