MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Reading AT89S8252 chip
 Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Lightguy

USA
4 Posts

Posted - 10/02/2008 :  13:50:44  Show Profile
It is actually a AT89S825224PI, I am using the dual power programmer, and when i read the chip it appears to be blank. I know the chip cannot be blank due to it functions in the device. It is also doing the same thing with a AT89C5224PC chip. I did take a blank AT89S8252 chip and program some random values on it, clear the buffer, then read the chip and it did read those values. Any idea on what is going on. I am using the MCS-51 adapter
Reply #1

ZLM

2945 Posts

Posted - 10/03/2008 :  11:26:06  Show Profile
The MCS-51 adapter seems not a correct adapter. Check the supported list of MCS-51 .
Go to Top of Page
Reply #2

Lightguy

USA
4 Posts

Posted - 10/03/2008 :  22:19:43  Show Profile

ADP-015 MCS-51+/51AVR+/scriptT89+ w/PLCC44 adapter

For Standard/Enhanced/True-USB Willem programmer
The adapter has build-in onboard a PLCC44 adapter, it's handy for the the PLCC44 chips.
Device supportedAtmel:
AT89C51,52,55 , AT89LV51,52,55, AT89S8252 (8K+2K) ,AT89S8253 (12K+2K), AT89S51, AT89S52, AT89S53, AT89LS8252,AT89LS53 AT89C1051,AT89C2051,AT89C4051 (20pin)AT89C51RC (32KB), AT89C55WD (6.2V)SST89C54/58, SI89C52
Intel:i87C51, i87C51FA, i87C51FBi8xC51,i8xC52,i8xC54,i8xC58
AVR AT90 series:AT90S1200,AT90S2313

Now what I am also wondering is this adapter compatible with my Dual power Willem Programmer?

One thing that it also does is say the chip was successfully read, even though there is not a chip installed.
Go to Top of Page
Reply #3

ZLM

2945 Posts

Posted - 10/05/2008 :  09:26:31  Show Profile
The adapter is standard Willem MCS-51 adapter, so it works on Dual Power.

Can you get the ID of the chip? That is the first step to working on the chip.
Go to Top of Page
Reply #4

dragoncracker

USA
8 Posts

Posted - 05/08/2017 :  19:23:03  Show Profile
I too am having trouble trying to get this chip to ID with this adapter I've pulled the datasheet, and am wondering how to set the jumper on the adapter to get it to read or if I need to short some pins to get it to read the ID. here is the datasheet h**p://www.hit-karlsruhe.de/hit-mic/projekte/drehanzeige/data/Datenblatt%20AT89s8252.pdf
Go to Top of Page
Reply #5

supervizeur

462 Posts

Posted - 05/29/2017 :  06:58:12  Show Profile
Jumper to the left.
Go to Top of Page
Reply #6

anniel

2572 Posts

Posted - 05/29/2017 :  09:37:57  Show Profile
quote:
Originally posted by supervizeur

Jumper to the left.



89
Go to Top of Page
Reply #7

supervizeur

462 Posts

Posted - 06/04/2017 :  03:01:06  Show Profile
Success?
Go to Top of Page
Reply #8

anniel

2572 Posts

Posted - 06/09/2017 :  06:28:59  Show Profile
quote:
Originally posted by supervizeur

Success?



We may never know.
Go to Top of Page
Reply #9

supervizeur

462 Posts

Posted - 06/12/2017 :  11:16:19  Show Profile
quote:
Originally posted by anniel

quote:
Originally posted by supervizeur

Success?



We may never know.



Probably.
Go to Top of Page
Reply #10

dragoncracker

USA
8 Posts

Posted - 06/22/2017 :  21:14:58  Show Profile
I still couldn't get the ID
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.13 sec. Snitz Forums 2000