MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Top 2048		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

evilpicster

Ethiopia
3 Posts
Posted - 03/28/2007 :  11:31:18  Show Profile
Hi,
I have a Top 2048 a pic16f627 and a proto/exp board with serial programming capabilities. I have had great luck with the board and
the chip using mikrobasic to generate a hex file then loading that
file with the board and it's software. the problem comes when I open
one of these hex files and write it to the chip with the top2048
it writes o.k. it verifies o.k. on the top2048 software but when I put it back on the protobord the chip does'nt do anything and when I tell the software for the board to verify it against the hex file I get errors. I am not sure what this config. word does or if that has anything to do with my problem.
Reply #1

ZLM

2945 Posts
Posted - 03/31/2007 :  02:03:24  Show Profile
Code protection bit turned on?
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000