| Author |
 Topic  |
|
|
Dayananda
India
1 Posts |
 Posted - 06/19/2018 : 12:46:58
|
Hi,
i recently purchased an GQ-4x4 updated the software and usb drivers. i am able to read the 5P08C3 eeprom data. but unable to write.i get the below mention error.
Device write complete ok
ID check Skipped
verifying... Buffer
Verfify Failed, Address = 0x00053, device = 0x03, Buffer = 0xff
I have attached the screen shoot of the same
waiting for your reply
Regards
Dayananda.T
Image Insert:
97321 bytes |
|
| Reply #1
davebb
United Kingdom
11 Posts |
Posted - 06/19/2018 : 22:50:20
|
Hi this works fine on my GQ-4X old ,
if I was you I would unscrew the programmer and test all pins on the zif socket to the pcb connectors with a multi meter, as I have found one pin not connected but the solder looked good,
Dave |
 |
|
| Reply #2
anniel
2572 Posts |
Posted - 06/20/2018 : 03:34:01
|
quote:
Originally posted by davebb
Hi this works fine on my GQ-4X old ,
if I was you I would unscrew the programmer and test all pins on the zif socket to the pcb connectors with a multi meter, as I have found one pin not connected but the solder looked good,
Dave
No need to open up the programmer to test it, you can simply use the software...
|
|
|
| |
Topic |
|
|
|
unable to write 5P08C3
