MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 AT29C256(Year 2000 and before chip only)		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Mick

USA
1 Posts
Posted - 05/22/2005 :  09:25:14  Show Profile
This pre-year 2000 reference appears in the TOP series "supported IC list" for the ATMEL EEPROMS. It seems a bit confusing since we are not aware of any design changes to the Atmel AT29C256 since its original release by Atmel. Could you please explain why this limitation exists, or possibly even check into the validity of this limitation for us.

This is extremely important, as a limitation such as this would prevent the use of these programmers by an extremely large consumer base.

Thanks,
Mick
Edited by - Mick on 05/22/2005 09:37:40
Reply #1

mcumall

78 Posts
Posted - 05/26/2005 :  17:59:06  Show Profile
Asked manufacture of TOP programmer. They found the programmer just does not work on AT29C256 made after year 2000. They did some investigation and they found they can not fix the problem in software right now. And need some time to fix it.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000