MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 gq-4x4 adp-054 and m28f102		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

lowlyfe1

USA
6 Posts
Posted - 01/15/2020 :  06:30:12  Show Profile  Reply with Quote
so unfortunately for me i bought this burner for one specific task and that was to burn chips for my older vw. from square one ive had issues with this burner. when writing verification fails and if you read the original file back off the chip not all bits are the same as the original. also if i try to erase the chip the burner will hangup program freezes and never blanks chips. after doing some research this is a common issue with blanking chips with this burner. its quite upsetting because i bought this burner for the specific task and it simply doesnt work. anyone know of a burner that works with these chips as advertised or have a solution to make this gq-4x4 work? thanks

Image Insert:

225458 bytes
jj
Reply #1

anniel

2572 Posts
Posted - 01/15/2020 :  06:54:56  Show Profile  Reply with Quote
quote:
Originally posted by lowlyfe1

so unfortunately for me i bought this burner for one specific task and that was to burn chips for my older vw. from square one ive had issues with this burner. when writing verification fails and if you read the original file back off the chip not all bits are the same as the original. also if i try to erase the chip the burner will hangup program freezes and never blanks chips. after doing some research this is a common issue with blanking chips with this burner. its quite upsetting because i bought this burner for the specific task and it simply doesnt work. anyone know of a burner that works with these chips as advertised or have a solution to make this gq-4x4 work? thanks


Try a lower speed.
Go to Top of Page
Reply #2

lowlyfe1

USA
6 Posts
Posted - 01/15/2020 :  10:39:21  Show Profile  Reply with Quote
quote:
Originally posted by anniel

quote:
Originally posted by lowlyfe1

so unfortunately for me i bought this burner for one specific task and that was to burn chips for my older vw. from square one ive had issues with this burner. when writing verification fails and if you read the original file back off the chip not all bits are the same as the original. also if i try to erase the chip the burner will hangup program freezes and never blanks chips. after doing some research this is a common issue with blanking chips with this burner. its quite upsetting because i bought this burner for the specific task and it simply doesnt work. anyone know of a burner that works with these chips as advertised or have a solution to make this gq-4x4 work? thanks


Try a lower speed.

Tried lowest write speed with double wtite slowest write /read speed with same result. Different chips all same result
jj
Go to Top of Page
Reply #3

anniel

2572 Posts
Posted - 01/15/2020 :  12:38:50  Show Profile  Reply with Quote
quote:
Originally posted by lowlyfe1

quote:
Originally posted by anniel

quote:
Originally posted by lowlyfe1

so unfortunately for me i bought this burner for one specific task and that was to burn chips for my older vw. from square one ive had issues with this burner. when writing verification fails and if you read the original file back off the chip not all bits are the same as the original. also if i try to erase the chip the burner will hangup program freezes and never blanks chips. after doing some research this is a common issue with blanking chips with this burner. its quite upsetting because i bought this burner for the specific task and it simply doesnt work. anyone know of a burner that works with these chips as advertised or have a solution to make this gq-4x4 work? thanks


Try a lower speed.

Tried lowest write speed with double wtite slowest write /read speed with same result. Different chips all same result
You are doing all this out of circuit, right?
Go to Top of Page
Reply #4

lowlyfe1

USA
6 Posts
Posted - 01/15/2020 :  18:18:35  Show Profile  Reply with Quote
yes sir
jj
Go to Top of Page
Reply #5

lowlyfe1

USA
6 Posts
Posted - 01/16/2020 :  07:24:00  Show Profile  Reply with Quote
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8581

http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8113

clearly im not the only one who had issues with this exact chip and burner combo... they are just going to sweep it under the rug and pretend like it doesnt exist?!?!
jj
Go to Top of Page
Reply #6

anniel

2572 Posts
Posted - 01/16/2020 :  08:31:00  Show Profile  Reply with Quote
quote:
Originally posted by lowlyfe1

yes sir
Good.
Go to Top of Page
Reply #7

anniel

2572 Posts
Posted - 01/16/2020 :  08:35:13  Show Profile  Reply with Quote
quote:
Originally posted by lowlyfe1

http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8581

http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8113

clearly im not the only one who had issues with this exact chip and burner combo... they are just going to sweep it under the rug and pretend like it doesnt exist?!?!
Probably, they never follow up or send out their chips.

Did you try all of the proposed solutions?

I guess you could compare the device line of 6.38 to discover yourself what changed since.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000