MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Winbond 25Q256JVFQ		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

stabio

United Kingdom
1 Posts
Posted - 11/25/2022 :  07:43:40  Show Profile  Reply with Quote
Hi,

Anyone read with success this chip Winbond 25Q256JVFQ 16PIN? I was using Adapter ADP-098 but i can't read this chip :/

Photo:

https://imgur.com/a/1AX98OA



Cheers
Reply #1

anniel

2572 Posts
Posted - 11/25/2022 :  08:45:25  Show Profile  Reply with Quote
quote:
Originally posted by stabio

Hi,

Anyone read with success this chip Winbond 25Q256JVFQ 16PIN? I was using Adapter ADP-098 but i can't read this chip :/

Photo:

https://imgur.com/a/1AX98OA


Cheers



Any error message in the log?
Go to Top of Page
Reply #2

ZLM

2945 Posts
Posted - 12/31/2022 :  09:22:47  Show Profile  Reply with Quote
1. Make sure you are using Re7.31 or later software.
2. Make sure the chip is correctly installed in the adapter
3. Make sure the chip orientation is correct in adapter.
4. Make sure the adapter orientation is correct in programmer ZIF.
5. Make sure the chip pins are clean and have good contacting with adapter.
6. Make sure the adapter has good contacting with programmer ZIF.

The 25Q256 chips are tested and should work on this programmer.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000