| Author |
 Topic  |
|
|
Ronen 722
United Kingdom
6 Posts |
 Posted - 10/03/2023 : 11:08:10
|
Hi all, need a bit of assistance if possible.
Im trying to disable the immo on the MSA 12, the immo data is held on an SOIC8 chip which I removed from the board and inserted into an SOIC8 to DIO8 adapter on the GQ-4x4 programmer.
I add device 93C46, successfully, I can read successfully, I alter the file in hex editor, erase the chip but when I try to wrtie the new or amended file I get write but then verify fails. Being EEPROM I should be able to write multiple times.....Confused.
verify failed, address=0x00002C, Device=0x60, Buffer=0x00
Pin 17 on the image of the slot is red
Any help gratefully received |
|
| Reply #1
anniel
2572 Posts |
Posted - 10/04/2023 : 05:57:12
|
quote:
Originally posted by Ronen 722
Hi all, need a bit of assistance if possible.
Im trying to disable the immo on the MSA 12, the immo data is held on an SOIC8 chip which I removed from the board and inserted into an SOIC8 to DIO8 adapter on the GQ-4x4 programmer.
I add device 93C46, successfully, I can read successfully, I alter the file in hex editor, erase the chip but when I try to wrtie the new or amended file I get write but then verify fails. Being EEPROM I should be able to write multiple times.....Confused.
verify failed, address=0x00002C, Device=0x60, Buffer=0x00
Pin 17 on the image of the slot is red
Any help gratefully received
Wich 93C46 device definition are you using? |
 |
|
| Reply #2
Ronen 722
United Kingdom
6 Posts |
Posted - 10/10/2023 : 04:47:13
|
quote:
Originally posted by anniel
quote:
Originally posted by Ronen 722
Hi all, need a bit of assistance if possible.
Im trying to disable the immo on the MSA 12, the immo data is held on an SOIC8 chip which I removed from the board and inserted into an SOIC8 to DIO8 adapter on the GQ-4x4 programmer.
I add device 93C46, successfully, I can read successfully, I alter the file in hex editor, erase the chip but when I try to wrtie the new or amended file I get write but then verify fails. Being EEPROM I should be able to write multiple times.....Confused.
verify failed, address=0x00002C, Device=0x60, Buffer=0x00
Pin 17 on the image of the slot is red
Any help gratefully received
Wich 93C46 device definition are you using?
Just that - 93C46 8 bit as device
Its texas instruments so tried the prefix but no luck |
|
|
| Reply #3
anniel
2572 Posts |
Posted - 10/10/2023 : 05:01:27
|
quote:
Originally posted by Ronen 722
quote:
Originally posted by anniel
quote:
Originally posted by Ronen 722
Hi all, need a bit of assistance if possible.
Im trying to disable the immo on the MSA 12, the immo data is held on an SOIC8 chip which I removed from the board and inserted into an SOIC8 to DIO8 adapter on the GQ-4x4 programmer.
I add device 93C46, successfully, I can read successfully, I alter the file in hex editor, erase the chip but when I try to wrtie the new or amended file I get write but then verify fails. Being EEPROM I should be able to write multiple times.....Confused.
verify failed, address=0x00002C, Device=0x60, Buffer=0x00
Pin 17 on the image of the slot is red
Any help gratefully received
Wich 93C46 device definition are you using?
Just that - 93C46 8 bit as device
Its texas instruments so tried the prefix but no luck
The chip passes blank check? |
|
|
| Reply #4
Ronen 722
United Kingdom
6 Posts |
Posted - 10/11/2023 : 03:37:12
|
blank check and IS not supported with chip type.
I had a successful write, i turned the adapter upside down and it wrote !
Still no comms to VCDS when ECU installed though and no start but the glow plug light now goes out.
I socketed the ECU and installed 28 pin DIPs with map files on |
|
|
| Reply #5
anniel
2572 Posts |
Posted - 10/12/2023 : 06:44:02
|
quote:
Originally posted by Ronen 722
blank check and IS not supported with chip type.
I had a successful write, i turned the adapter upside down and it wrote !
Still no comms to VCDS when ECU installed though and no start but the glow plug light now goes out.
I socketed the ECU and installed 28 pin DIPs with map files on
One pin is bad on the adapter? |
|
|
| Reply #6
Ronen 722
United Kingdom
6 Posts |
Posted - 10/16/2023 : 07:15:40
|
| This programmer always shows one bad pin. |
|
|
| |
Topic |
|
MSA12 Immo Off problems - Verify Fails after write
