Hi everyone, I am going crazy, because I cannot program any 2532 eprom family chipsets.
I have 2 programmers
One GQ-4x
and one GQ-4x4
One on windows XP with 6.x software and one on a modern windows USB 3 with 7.x software.
I have several TMS2532JL-45, bought from different sellers, I cannot program anyone.
With the 6.x software programming stops at 4% (2532 and TMS2532JL)
With 7.x software, programming completes (100%), but it fails when verified and when I read the eprom content it is empty (FF FF etc)
The weird thing is that I was able (with the GQ-4X) to program some 2532 in the past (as generic) but now, I cannot do that anymore with any of the two programmers.
Of course I have an external power adapter (10V-12V)
Does it a have a too low voltage? Do I have to give you more voltage?
I read that the external power should be 9-12V, but is it true?
Thanks for your help. Any suggestion will be appreciated.
Have a great day
Best
Stefano |
2532 (generic) and TMS2532JL FAULTY PROGRAMMING
Posted - 12/10/2023 : 07:15:07
