MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 Enhanced JDM v2		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

thunderchild214

1 Posts
Posted - 11/16/2007 :  15:04:05  Show Profile
I bought this programmer off of ebay:

h**p://cgi.ebay.com/Enhanced-JDM-PIC-programmer-4-Microchip-12F629-New-V2_W0QQitemZ300172708445QQihZ020QQcategoryZ4661QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

How/where would I apply external power supply if I needed too (If i ever decided to use a USB - Serial adapter)?

tc214
Reply #1

ZLM

2945 Posts
Posted - 11/18/2007 :  21:21:45  Show Profile
There is a -12+ port(two pin header) on board. apply DC 12V on it if needed. However, please make sure your serial port is a good port and you need this 12V.
The programmer does not work with USB->Serial adapter. IT only works with standard RS232 port.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000