MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 GAL20V10D won't write		  Forum Locked
 Printer Friendly
Author Previous Topic Topic   

gtbecker

2 Posts
Posted - 06/20/2004 :  15:07:06  Show Profile
I've easily programmed a number of ATF20V8B GALs, but the TOP2003 doesn't want to write to a GAL20V10D using the 20V10 or 20V10A profiles. Anyone had success?

Tom
Reply #1

someone

28 Posts
Posted - 06/21/2004 :  12:21:35  Show Profile
The GAL20V10D seems not in the supported list. Pls. check your list again. It only has GAL20V8B.
Go to Top of Page
Reply #2

gtbecker

2 Posts
Posted - 06/23/2004 :  06:58:44  Show Profile
Sorry, it's a GAL22V10D. GAL22V10A is on the list, and Lattice says that the -D version's programming specification is the same as the -A version, so it should work, but doesn't.

Fortunately, I found that I could program the GAL22V10D myself with an easily-built parallel-port adapter and a free application, GALBlast.

Once programmed, a TOP2003 can read and verify the part. It just can't write to it.


Tom
Edited by - gtbecker on 06/24/2004 08:30:22
Go to Top of Page
  Previous Topic Topic   
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000