MCUmall EPROM BIOS Chip Burner Forum - suggest me a programmer

Active Users: / Visits Today:
Highest Active Users:

MCUmall EPROM BIOS Chip Burner Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

MCUmall Forums

Novice Place

suggest me a programmer

Forum Locked

Printer Friendly

Author

Topic

vishaldotgupta

India
38 Posts

Posted - 05/18/2008 : 09:24:32

i am working on a system having a "XC9572 In-System Programmable
CPLD". the part no is XC9572 15PQ100C. can you suggest me a programmer which can read the chip and re program it. the sytem also consists of a controller MC68306pVI8

Reply #1

ZLM

2945 Posts

Posted - 05/19/2008 : 08:38:17

The PRG-031 will do the ISP programming for this chip.
See:
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3207

The only programmer supports MC68306 is the PRG-Xeltek-001 SuperPro3000U Programmer

see:
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3157

Reply #2

vishaldotgupta

India
38 Posts

Posted - 05/19/2008 : 10:30:35

DEAR ZLM

thanks for replying/ the xc chip has 100 pins. would it be possible to read the program through PRG 031

Reply #3

ZLM

2945 Posts

Posted - 05/19/2008 : 20:13:45

Yes. The PRG-31 is uses JTAG interface. It only connects 5 pins of chip for In-System-Programming(ISP). So, it can program the chip in the circuit after you soldered the chip on the circuit board.

Reply #4

vishaldotgupta

India
38 Posts

Posted - 05/29/2008 : 21:44:52

dear zlm, thanks for your advise. before buying it, i want to try one experiment. my friend has labtool which supports this chip. i have identified jtag prot on board. now please advise how to connect jtag port to labtool programmer. it has 48 pins dip zif socket. to which pins of labtool zif should i connect the jtag port 5 pins.

regards

Topic

Forum Locked

Printer Friendly

Jump To:

MCUmall EPROM BIOS Chip Burner Forum

Generated in 0.08 sec.

Snitz Forums 2000