MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Pic 18F2525 with PCB50 problems		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

azure

Australia
3 Posts
Posted - 03/19/2010 :  13:26:34  Show Profile
Hi I am having problems trying to write to my pic18F2525 chip.
I have connected my chip via ICSP to the appropriate pins on the chip.

I select the pic with in the programmer and load the Hex file I'm trying to write.

When I try to write to the chip I get the error
Error Program Memory at 0x000000


Any help would be Appreciated
Cheers
Reply #1

ZLM

2945 Posts
Posted - 03/19/2010 :  16:52:46  Show Profile
chip need to be erased before write. Do blank check before write.
Go to Top of Page
Reply #2

azure

Australia
3 Posts
Posted - 03/20/2010 :  10:26:13  Show Profile
Still no luck.
First I clear the chip
Status: "CHK Blank Code OK (no Checksum CFG)"

Next I select program the chip the software says
"Programming Code (0x6000) Word"
This reaches 100%
It then says "Programming EEPROM (0x400) byte"
This reaches about 60% and fails with a status of "Error Program memory at 0x000000"


quote:
Originally posted by ZLM

chip need to be erased before write. Do blank check before write.
Go to Top of Page
Reply #3

ZLM

2945 Posts
Posted - 03/24/2010 :  20:46:16  Show Profile
That maybe software bug.
Go to Top of Page
Reply #4

azure

Australia
3 Posts
Posted - 03/25/2010 :  03:36:50  Show Profile
quote:
Originally posted by ZLM

That maybe software bug.


Ok, I am running the latest software that came with the programmer and I can find no newer versions online.
Is there any other software compatible with the Willem pcb50 programmer? or do I need to go buy a new programmer..
Go to Top of Page
Reply #5

ZLM

2945 Posts
Posted - 03/26/2010 :  10:55:29  Show Profile
Try IC-Prog Software. that works with this programmer.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000