MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 TSOP chip, Spansion		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

ECruzchip

USA
1 Posts
Posted - 04/12/2010 :  15:21:05  Show Profile
Hi Folks,

I'm newbie to this forum group.

I have a PCB which already have an TSOP chip made by
Spansion. It's a 32 MB of memory.
I was told by someone in order to get a new TSOP chip,
is to find S29GL032N90 chip to replace it.

Or is there anyway that I could re-write on the same
memory chip that's already on the PCB??

What tools and software would I need to re-program
the same TSOP chip on the PCB???

Would I need to have a cable jumber?? Like J3??
Would I need
--ADP-003/3102 TSOP48 8/16 bit adapter V2.0
--jumper J3
--017E device ID, manufacture AMD
--GQ USB series programmer SW?????

Would I need to have a new BIOS to re-write on that chip??

I wish that I could include image of the PCB with
a TSOP chip on it. But I have no other ways to insert photo
to show you.

Hope this helps with answers.
Thank you,
Eugene
Reply #1

ZLM

2945 Posts
Posted - 04/13/2010 :  09:45:14  Show Profile
Most of cases you have remove the TSOP48 chip from your PCB and then program it from a programmer.

You need a TSOP48 adaper to program it on a programmer.

Once of the programmer and the adapter can be: GQ-4X and ADP-003.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000