MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Need help to test a Willem Programmer		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Otto

2 Posts
Posted - 08/28/2010 :  06:42:38  Show Profile
Hi, I'm very new to eproms and programmers.

I bought a programmer from ebay and I want to program 27C801 chips, but since right now I don't have any, I just want to test if the programmer is working ok. Here is a photo of my programmer:


54.18 KB

So, in order to test, I went to "Test H/W" tab and set the programmer switches like the picture below shows:


51.29 KB

But if I click on Help > Test Hardware, I get this error: "Hardware Error: Check power & connection". I have connected the USB and DB-25 parallel ports.

Does this mean it's defective or what am I doing wrong?

Thanks in advance.
Reply #1

Otto

2 Posts
Posted - 08/28/2010 :  19:18:40  Show Profile
Stupid me. I read the manual in the morning telling me to change BIOS setting for LPT but totally forgot that in the afternoon, when I actually had time to test.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000