MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 HELP! Problems reading a 27c512 chip.		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

bman2020

USA
1 Posts
Posted - 11/23/2010 :  18:34:40  Show Profile
I am having trouble reading one of my 27c512 compatible chips with my programmer. The programmer will read the chip, but the saved bin file is entirely off and unusable. I'm pulling my hair out trying to figure out why this is happening without any success.

To give you some more details, the chip is an eprom chip used in my car. I have several different chips and I'm able to read them all with my willem programmer with the exception of this one chip. This chip is not corrupted as it works perfectly in the car.

When I try to read the chip with my programmer, the hex codes in the bin appear entirely incorrect. For example, a blank line in the binary shows up as:

FF 77 EB 63 BE 36 AA 22 DD 55 C9 41 9C 14 88 00

instead of:

FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Any ideas and/or help would be greatly appreciated!!!
Reply #1

ZLM

2945 Posts
Posted - 11/28/2010 :  10:22:12  Show Profile
clean up chip pin, and confirm all pin contacts are good.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000