MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 please can someone help with getting a hex dump		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

craig6928

United Kingdom
16 Posts
Posted - 03/09/2011 :  20:40:58  Show Profile
hi i posted the same problem im having
this is driving me nuts


can someone help us please i need to get a good dump hex of a pic chip i have here


im using the willem programmer

the chip in question is a PIC 16F819

i load it up to the first buffer (is this correct)

then i save the file out as a hex

when i load it back in to reprogram the chip

i go into buffer and load it up the first one (is this correct)

once i click program full chip the green bar goes across
it goes to 70% and that it

after that it says config area programming

and does nothing else

can someone show me how to do and get a dump hex
and load it onto the other pic

another pic chip


thank you
Reply #1

ZLM

2945 Posts
Posted - 03/09/2011 :  21:28:05  Show Profile
Do verify to confirm if it is programmed correctly.
Go to Top of Page
Reply #2

craig6928

United Kingdom
16 Posts
Posted - 03/10/2011 :  02:09:49  Show Profile
thank you for your help ZLM

i post back with my findings

Go to Top of Page
Reply #3

craig6928

United Kingdom
16 Posts
Posted - 03/10/2011 :  15:52:03  Show Profile
hello ZLM i did the chip verify confirm and it says the hex is ok

but i used the program you said ic prog older version.

this did a perfect dump of the chip

but came up error VERIFY FAILED ADRESS 0000H

when i tried to reprogram it

so i used willems programmer to burn the hex
and it worked

the only error in there program is that it does not come up done

it stays on and say programming pic config area

Go to Top of Page
Reply #4

craig6928

United Kingdom
16 Posts
Posted - 03/10/2011 :  15:53:55  Show Profile
thank you for your help ZLM
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000