| Author |
 Topic  |
|
|
Hernan
Argentina
13 Posts |
 Posted - 02/28/2011 : 03:50:21
|
Hello, I have the willem usb, I need to manufacture tsop48 adapter, enclosed the images of my adapter
For read MX29F016
Image Insert:
24.35 KB
Image Insert:
186.53 KB
Image Insert:
29.2 KB |
Edited by - Hernan on 02/28/2011 06:38:32
|
|
| Reply #1
Hernan
Argentina
13 Posts |
Posted - 03/02/2011 : 03:51:31
|
this?
Image Insert:
25.4 KB
Image Insert:
34.91 KB
thank you in advance |
Edited by - Hernan on 03/02/2011 03:53:27 |
 |
|
| Reply #2
Hernan
Argentina
13 Posts |
Posted - 03/03/2011 : 05:17:58
|
| Thank you, very clear their explanation |
|
|
| Reply #3
ZLM
2945 Posts |
|
| Reply #4
Hernan
Argentina
13 Posts |
|
| Reply #5
ZLM
2945 Posts |
Posted - 04/03/2011 : 07:07:33
|
Your ship should be TSOP40 package.
If you already got ADP-082, then you only need the ADP-077.
The ADP-033A should work too.
|
|
|
| Reply #6
Hernan
Argentina
13 Posts |
Posted - 04/23/2011 : 04:29:04
|
another question
I buy
1 ADP-077
2 ADP 082
question, do I connect in the jumper J4 of the ADP-082?? to the jumper J4 of the willem?
A19 ..adp-082 to A19 to pcb willem ?
A20 to A20 to pcb willem ?
A21 to A21 to pcb willem ?
Selec model MX29LV ??? only in those requests adapter
thank you for their patience
excuse my ignorance
|
|
|
| Reply #7
ZLM
2945 Posts |
Posted - 04/24/2011 : 17:37:13
|
If your programmer is GQ-4X then you do not need any address line connection.
If your programmer is GQ-3X, then you need to connect A19, A20, A21 |
|
|
| Reply #8
Hernan
Argentina
13 Posts |
Posted - 04/29/2011 : 04:16:43
|
Hello, for MX29F016, I choose AM29f016, he/she doesn't read, single bad load the information
Image Insert:
178.96 KB
to record, he gives me errors, I am not able to record the flash
Image Insert:
52.02 KB
pin in adapter V 1.0-V2.0 and I plug the adapter in pin TSOP40A and TSOP40B, but I am not able to read neither to record
Image Insert:
20.04 KB
Some other idea or he/she helps
My English excuse I use translate |
|
|
| Reply #9
ZLM
2945 Posts |
Posted - 05/02/2011 : 21:19:59
|
| I think the programmer got some problem. |
|
|
| |
Topic |
|
I need to manufacture tsop48 interface
Forum Locked
