MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 PCB3b hardware error		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

hackbar

1 Posts
Posted - 06/12/2012 :  14:36:46  Show Profile
I have a PCB3b dual-power Willem that I've been modifying to do 25V VPP. I replaced two transistors, the inductor, and the 7805.

VPP and VCC are now great in test mode, however when I try to program the software gives me "Hardware error: check power & connection".

How do I fix this?

I started a topic on the ezoflash forums, but it's sat unanswered for a while:
h**p://www.ezoflash.com/forum/viewtopic.php?f=10&t=5659
Reply #1

ZLM

2945 Posts
Posted - 06/18/2012 :  12:58:01  Show Profile
This is nothing to do the VPP.

It related to your data cable connection and power cnnection.

Use self test procedure to check it.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000