MCUmall EPROM BIOS Chip Burner Forum Active Users: / Visits Today:
Highest Active Users:
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Flashing BIOS Chip W39V040AP		  Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

carlaik

1 Posts
Posted - 07/25/2006 :  14:36:55  Show Profile
Hello.. This is also my first visit to the Forum.. please forgive the suddent question.

Using Dual Power Willem Programmer, with PDIP32 to PLCC32 Adapter,

I am Trying to hard Flash a BIOS chip. ( actually 2 ).

Winbond W39V040AP, According to my research, this a 3.3V 4MB Chip.

Can you suggest the settings on J1 and J2 and the DIP switches for this program. It seems to respond to ROM Ident and reads simply Fijitsu and 0x04 in both Manufctr and Device code.

I am not new at this. but I dont have spares to replace this with and dont want to burn it up.

Thanks, Personal Email accepted.
will check forum also.
Reply #1

ZLM

2945 Posts
Posted - 07/25/2006 :  16:19:40  Show Profile
W39V040AP need FWH/LPC adapter. Not the PLCC32-DIP32 adapter.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000